Fax:0757-86798148
Aftermarket:0757-86795444
Q Q:1477182165
Application: widely used in gun, artillery, tanks or internal combustion enginecylinder, piston ring and copper iron industry roller high abrasion device in electroplating.
1.To adapt to full load continuous operation, low ripple reversing plating conditions,such as: hard chromium plating.
2. Low ripple coefficient, outstanding performance on coating uniformity.
3.Large current (more than 20KA) output power using twelve phase full watercooling mode, has the advantages of simple structure, high reliability, high efficiency.
4.Small output current using air-cooled, large output current (more than 10KA) with high power water-cooling device composed of rectifier circuit.
5.The denseness and corrosion resistance of the coating. Brightness, hardness, air gap rate and other indicators are much higher than ordinary six-phase DC power supply.
6.Advanced technology, high precision Hall device output current detection device.
7.The output current and voltage are continuously adjusted, and the three-phase unbalanced, over-water, and over-temperature protection functions are complete.
Input Voltage | AC380V±10% 50/60Hz |
Output Range | Voltage, current common, nominal 10% -100% |
The output voltage | 0-48V |
Output Current | 1000-30000A |
Control | Crystal Promise explain tube continuous control |
Rated, cooling | Continuous forced air / water |
Rated voltage control accuracy | Within ± 1% of rated DC voltage value |
Rated current control accuracy | Within ± 1% of rated DC current value |
Ripple factor | Below1% |
Installation Site | Indoor |
Ambient temperature | -10~40℃ |
Relative Humidity | 30%~85% |
Altitude | Below1000m |