Fax:0757-86798148
Aftermarket:0757-86795444
Q Q:1477182165
Aluminum profile oxidation,chrome plating in the mechanical industry, metal surface treatment,electroplating process, electrolysis, water treatment, etc.
1, flat drawerstructure, dual handle design for easy handling
2. Adopt advancedmulti-motor parallel synchronous current sharing output technology. Theexternal controller sets a certain power. The system will evenly distribute thepower to all the following unit modules. The average flow coefficient betweeneach module is within 1%, so the average current effect is very good, and itcan realize even output of multiple power circuits.
3, power supplyadopts N+X redundant standby system. All modules are involved in the work. Onceone of the modules fails, the system automatically exits the failed unit. Theother modules share the fault cell current, so that the total output voltageand current remain unchanged. After the production is completed, the faultymodule can be removed and maintained, greatly improving the reliability of the powersupply.
4, goodanti-corrosion performance, the internal circuit board adopts treatment ofpreventing salt spray acidification of the "three defenses"
5, with a softstart, over-current, overheating and many other automatic protection and soundand light alarm
6, using RS485digital network controller, no attenuation of control signal, ensure highoutput accuracy
7, touch screencontrol, operation more convenient and intuitive
Input voltage | Two phases 220V three phase 380V 50HZ-60HZ |
Voltage regulation accuracy | ≤1% |
Steady current accuracy | ≤1% |
Rated efficiency | ≥90% |
Power factor | 0.94 |
Control | Touch Screen Control or table Control (Remote/Short-range) |
Circuits | IGBT Pulse width modulation |
cooling type | Continuous forced air-cooling, water-cooling |
Ambient temperature | 0℃-45℃ |
Operating conditions | Full load 24 hours |
Control interface | Aviation Interface, PLC Interface, Industry Standard Signal Interface |